Crazyflie 2.0 Nano Quadcopter

Description:

The Crazyflie 2.0 is a weightless, wide association flying improvement stage built upon a nano quadcopter. The crazyflie 2.0's size is equivalent to your palm having a weight of 27 grams helping with Wifi and Bluetooth 

The firmware is drafted in C++. 

It comprises of the different dialects to compose the code i.e. python, C#, C++, Ruby, NodeJS, Scala, Java, and Ada/SPARK 

Some different highlights are sitting tight for you, see beneath: 

Crazyflie Features 

Little and weightless, right around 19gram and engine to engine is 90mm 

Reporting in real time, time is up to 7 minutes and joins the 170mAh Li-Po Battery 

It comprises of Standard miniaturized scale USB connector for charging the crazyflie 2.0 that will take around 20 minutes for the stock 170mAh Li-Po battery. 

On-board low-vitality [email protected] dependent on the nRF24L01+ chip. Up to 80m territory 

(condition subordinate) when utilizing the Crazyradio USB dongle 

Radio bootloader which empowered remote refresh of the firmware 

Intense 32 bit MCU: STM32F103CB @ 72 MHz (128kb blaze, 20kb RAM) 

3-pivot superior MEMs gyros with 3-hub accelerometer: Invensense MPU 6050 

3-pivot magnetometer HMC5883L (compass) 

High accuracy altimeter MS5611-01BA03 

Development header 2×10 pins 1.27mm (0.05") pitch including power, I2C/UART, SPI/ADC. The header likewise contains ARM Cortex 10-stick JTAG (header excluded) 

4-layer low clamor PCB plan with discrete voltage controllers for advanced and simple supply. 

Bundle Contents 

1 x Crazyflie 2.0 control board with all parts mounted 

5 x CW propellers 

5 x CCW propellers 

6 x Motor mounts 

1 x LiPo battery (240mAh) 

5 x Coreless DC engines) 

2 x Short extension connector pins (1×10, 2mm dividing, 8 mm long) 

2 x Long extension connector pins (1×10, 2mm separating, 14 mm long) 

1 x Battery holder development board