STM32F407ZET6 ARM STM32 Dev-Board Port-407Z

Port407Z is an STM32 development board that features an STM32F407ZET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family.

Overview:

Port407Z is an STM32 development board that features an STM32F407ZET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family.

  1. STM32F407ZET6: the high performance STM32 MCU which features:
    • Core: ARM Cortex-M4 32-bit RISC
    • Feature: a full set of single-cycle DSP instructions
    • Operating frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
    • Operating voltage: 1.8V-3.6V
    • Package: LQFP144
    • Memories: 512KB Flash, 196kB SRAM
    • MCU communication interfaces:
      • 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C
      • 1 x FSMC, 1 x SDIO, 2 x CAN
      • 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
      • 1 x 10/100 Ethernet MAC
      • 1 x 8 to 14-bit parallel camera interface
    • AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. AMS1117-3.3: 3.3V voltage regulator
  3. MIC2075-2BM: onboard chip for USB power management
  4. Power indicator
  5. LEDs: convenient for indicating I/O status and/or program running state
  6. Reset button
  7. User keys
  8. Joystick: five positions
  9. 8M crystal oscillator: enables the MCU run at 168M frequency by frequency multiplication
  10. 32.768K crystal oscillator: for internal RTC with calibration
  11. JTAG/SWD interface: for debugging/programming
  12. USB connector, used for establishing USB communication between PC and the STM32 development board
  13. UART1 connector, supports ISP (In-System Programming) through UART1, as well as system signal output
  14. IO expander, all the MCU pins are accessible on expansion connectors for further expansion
  15. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
  16. 5V DC jack
  17. Boot mode selection: for configuring the BOOT0 and BOOT1 pins
  18. Power supply switch, powered from 5V DC jack or USB connection
  19. USB HOST jumper
    • short the jumper when using USB HOST
    • open the jumper to disconnect from I/O port
  20. VBAT selection jumper
    • short the jumper to use system power supply
    • open the jumper to connect the VBAT to external power, such as battery
  21. VREF jumper
    • short the jumper to connect VREF+/VREF- respectively to VCC/GND
    • open the jumper to connect VREF+/VREF- to other custom pins via jumper wires
  22. User LEDs jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
  23. User keys jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
  24. Joystick jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
    •  Standard configuration

      1. Port407Z development board x1
      2. Take special USB cord x1
      3. USB cable (mini) x1
      4. 4PIN experimental connecting line x2
      5. 2PIN experiments cable x2
      6. STM32 data CD (including all types of devices Datasheet, entry-learning materials, STM32 development information provided by ST) x1
      1
      2
      3
      4
      5
      6
Product Related Tutorial
Customer Comments
Be the first one to leave a comment...
Customer Reviews
No reviews posted yet