Products categories

Raspberry Pi 8Mp 8MegaPixel Camera V2.0
close

The Raspberry Pi camera module v2 replaced the original camera module in April 2016. The v2 camera has a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision OV5647 sensor of the original camera).

The camera module can be used to take high-definition video, as well as stills photographs. It’s easy to use for beginners, but has plenty to offer advanced users if you’re looking to expand your knowledge. There are lots of examples online of people using it for time-lapseslow-motion and other video cleverness. You can also use the libraries we bundle with the camera to create effects.

You can read all the gory details about IMX219 and the Exmor R back-illuminated sensor architecture on Sony’s website, but suffice to say this is more than just a resolution upgrade: it’s a leap forward in image quality, colour fidelity and low-light performance. It supports 1080p30, 720p60 and VGA90 video modes, as well as still capture. It attaches via a 15cm ribbon cable to the CSI port on the Raspberry Pi.

The camera works with all models of Raspberry Pi 1, 2 and 3. It can be accessed through the MMAL and V4L APIs, and there are numerous third-party libraries built for it, including the Picamera Python library. See the Getting Started with Picameraresource to learn how to use it.

The camera module is very popular in home security applications, and in wildlife camera traps.

 

  • 8 megapixel camera capable of taking photographs of 3280 x 2464 pixels
  • Capture video at 1080p30, 720p60 and 640x480p90 resolutions
  • All software is supported within the latest version of Raspbian Operating System
  • Applications: CCTV security camera, motion detection, time lapse photography

Aluminum Multifunction Servo Bracket Steering Head for Pan and Tilt
close

Description:
Material: 2.2mm aluminum  
Surfacing: sandblasting
Dimensions: 58X37X25.5mm
Weight: 15g
Color: Black

Package Included:
1 X Bracket 
1 X Several screws

LM2596 DC to DC (buck) 4.5v to 40v Adjustable step Down Power Supply Module
close

This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on LM2596 Switching Regulator

Specification:
Input voltage: 3.2-40V (Input voltage must be higher than output voltage 1.5V above)

Output voltage: 1.5-35V (Adjustable)

Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)

If the output power greater than 15W, the proposed combined heat sink

Product Description

This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on LM2596 Switching Regulator

Specification:
Input voltage: 3.2-40V (Input voltage must be higher than output voltage 1.5V above)

Output voltage: 1.5-35V (Adjustable)

Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)

if the output power greater than 15W, the proposed combined heat sink.

Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)

Switching Frequency:150KHz

Rectifier: Non-Synchronous Rectification

Module Properties: Non-isolated step-down module (buck)

Short circuit protection: current limiting, since the recovery

Operating temperature:Industrial grade (-40 Deg C to +85 Deg C) (output power 10W or less)

Full load temperature rise: 40 Deg C
Load regulation: ± 0.5%
Voltage regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Size: about 50 (L) * 23 (W) * 13 (H) mm (with potentiometer)

Output ripple:
Input 12V Output 5V 3A 60mV (MAX)
Input 24V Output 12V 3A 120mV (MAX)

Notice: the step-down module, the input voltage must be higher than the output voltage.

Comments

Crzyflie2.0 Nano Quadcopter
close

Description:

The Crazyflie 2.0 is a weightless, wide association flying improvement stage built upon a nano quadcopter. The crazyflie 2.0's size is equivalent to your palm having a weight of 27 grams helping with Wifi and Bluetooth 

The firmware is drafted in C++. 

It comprises of the different dialects to compose the code i.e. python, C#, C++, Ruby, NodeJS, Scala, Java, and Ada/SPARK 

Some different highlights are sitting tight for you, see beneath: 

Crazyflie Features 

Little and weightless, right around 19gram and engine to engine is 90mm 

Reporting in real time, time is up to 7 minutes and joins the 170mAh Li-Po Battery 

It comprises of Standard miniaturized scale USB connector for charging the crazyflie 2.0 that will take around 20 minutes for the stock 170mAh Li-Po battery. 

On-board low-vitality radio@1mW dependent on the nRF24L01+ chip. Up to 80m territory 

(condition subordinate) when utilizing the Crazyradio USB dongle 

Radio bootloader which empowered remote refresh of the firmware 

Intense 32 bit MCU: STM32F103CB @ 72 MHz (128kb blaze, 20kb RAM) 

3-pivot superior MEMs gyros with 3-hub accelerometer: Invensense MPU 6050 

3-pivot magnetometer HMC5883L (compass) 

High accuracy altimeter MS5611-01BA03 

Development header 2×10 pins 1.27mm (0.05") pitch including power, I2C/UART, SPI/ADC. The header likewise contains ARM Cortex 10-stick JTAG (header excluded) 

4-layer low clamor PCB plan with discrete voltage controllers for advanced and simple supply. 

Bundle Contents 

1 x Crazyflie 2.0 control board with all parts mounted 

5 x CW propellers 

5 x CCW propellers 

6 x Motor mounts 

1 x LiPo battery (240mAh) 

5 x Coreless DC engines) 

2 x Short extension connector pins (1×10, 2mm dividing, 8 mm long) 

2 x Long extension connector pins (1×10, 2mm separating, 14 mm long) 

1 x Battery holder development board

510K 0603 SMD Resistor( 20pcs packet)
close

510K 0603 SMD Resistor

BH1417F FM Stereo Transmitter Wireless Audio Link IC
close

Controller Family/Series:PIC24
Core Size:16bit
No. of I/O's:51
Program Memory Size:256 KB
RAM Memory Size:16KB
CPU Speed:32MHz
Oscillator Type:External, Internal
No. of Timers:5
Peripherals:ADC, Comparator, PWM, RTC, Timer
Embedded Interface Type:I2C, SPI, UART
No. of PWM Channels:9

 

Digital IC Case Style:TQFP
Supply Voltage Range:2V to 3.6V
Operating Temperature Range:-40°C to +85°C
No. of Pins:64
MSL:MSL 3 - 168 hours
SVHC:No SVHC (19-Dec-2011)
Flash Memory Size:256KB
Interface:I2C, JTAG, SPI, USB
Interface:I2C, JTAG, PMP, PSP, SPI, UART, USB
Interface Type:I2C, SPI, UART
Logic Function Number:24FJ256GB106
Memory Size:256KB
Memory Type:FLASH
No. of ADC Inputs:16
No. of Bits:16
No. of I/O's:52
No. of MIPS:16
Operating Temperature Max:85°C
Operating Temperature Min:-40°C
Package / Case:TQFP
Program Memory Size:256KB
Supply Voltage Max:3.6V
Supply Voltage Min:2.2V
Termination Type:SMD
Applications: wireless speakers, personal computer,game machine, CD charger, car TV,car navigation