Accelerometer-Compass & Gyro(IMUs)
BMP180 DIGITAL BAROMETRIC PRESSURE SENSOR BOARD MODULE
close

Description:

 

  • Quantity : 1pc
  • Size: 21mm x 18mm
  • 1.8V to 3.6V Supply Voltage
  • Max I2C Speed: 3.5Mhz
  • Low power consumption - 0.5uA at 1Hz
    I2C interface
  • Very low noise - up to 0.02hPa (17cm)
  • Full calibrated
    Pressure Range: 300hPa to 1100hPa (+9000m to -500m)

 

Package includes:

 

1PC X BMP180 Digital Barometric Pressure Sensor Board Module

  • aeProduct.getSubject()

aeProduct.getSubject()

MPU9250 BMP280 10DOF Acceleration Gyroscope Compass Nine Shaft Sensor Module GY-91
close

Description:

Chip: MPU-9250+BMP280
Power supply: 3-5V
Communication: standard IIC/SPI communication protocol
Chip built-in 16 bit AD converter,16-bit data output
Scope of gyroscope: + or -250 500 1000 1000 ° / s
Acceleration: plus or minus 2   4   8   16 g
Magnetic field scope:  plus or minus 4800 ut
Pressure range: 300-1100 hpa
Material:gold PCB
Pin spacing: 2.54 mm
Size: 14.3 mm * 20.5 mm

 

GY-271 3-AXIS HMC5883L Digital Magnetometer / Compass Module
close

 

Using a magnetometer can be a little tricky, especially if you are unsure about the formulas to use to get the correct bearing and when other magnetic objects are interfering with your signal. You could download a arduino library for this module, which will also be compatible with other HMC5883L breakout boards made by other manufacturers.

HMC5883L 3-Axis Digital Compass Module




Description : 

Using a magnetometer can be a little tricky, especially if you are unsure about the formulas to use to get the correct bearing and when other magnetic objects are interfering with your signal. You could download a arduino library for this module, which will also be compatible with other HMC5883L breakout boards made by other manufacturers.

Electronic Feature :

1. Immersion Gold PCB, machine welding process to ensure quality.

2. Name: HMC5883L module (three-axis magnetic field module).

3. Use the chip: HMC5883L.

4. Power supply: 3V ~ 5V.

5. Communication modes: standard IIC communication protocol (3.3V~5V TTL).

6. Measuring range: ± 1.3-8 Gauss.

7. Size: 14mm x 13mm




 

 




Example :

More details will be shown step by step in the test file.

Download the Arduino Library for HMC5883L and extract it to your library folder in your Arduino installation. Mine is here: C: Program Files arduino-0021libraries.

Connect this module with Arduino :

Arduino GND -> HMC5883L GND
Arduino 3.3V -> HMC5883L VCC
Arduino A4 (SDA) -> HMC5883L SDA
Arduino A5 (SCL) -> HMC5883L SCL

Here we use Arduino Sensor Shield to make connection very easy. 

 

 

 

GY-61 ADXL335 3 Axis Accelerometer Module (Analogue Output )
close

Features: Chip: ADXL335. Power supply: 3.3-5V. X,Y,Z output.

Features:

  • Chip: ADXL335.
  • Power supply: 3.3-5V.
  • X,Y,Z output.
  •  

Pin Definitions:

  • VCC:3.3V or 5V
  • X_OUT:Analog Output
  • Y_OUT:Analog Output
  • Z_OUT:Analog Output
  • GND:Ground
  •  

Package Included:

  • 1 x GY-61 ADXL335 3-axis Analog Output Accelerometer Module angular sensor

GY-291 ADXL345 3 AXIS Accelerometer Module (Digital Output)
close

 

Description :

The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is acces-sible through either a SPI (3- or 4-wire) or I2C digital interface.

The ADXL345 is well suited for mobile device applications. 

Description :

The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is acces-sible through either a SPI (3- or 4-wire) or I2C digital interface.

The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing appli-cations, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°.

Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated, patent pending memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption.

Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.

Features :

1、Main Chipset: ADXL345

2、Communication: IIC/SPI Communication Protocol

3、Measuring Ranging: ±2g±16g

4、Digital Output: SPI/IIC

5、3-axis, ±2g/±4g/±8g/±16g

6、Compact Accelemotor/Inclinometer

7、Working Voltage: 3V to 5V

8、Working Temperature: -40° to 85°

9、Working Current: 30uA

10、Low Power Consumption

11、Compatible with 51、AVR、Arduino

Connect this module with Arduino :

Arduino GND -> ADXL345 GND
Arduino 3.3V -> ADXL345 VCC
Arduino A4 (SDA) -> ADXL345 SDA
Arduino A5 (SCL) -> ADXL345 SCL

Single axis Analogue Gyroscope Module ENC-03RC
close

Chip: ENC-03RC Op-amp: The ENC-03RC (SOT23-5 package, excellent performance) Power supply :3-5v Output mode: analog output Ultra-small size: 10mm * 17.5mm

This angular speed sensor uses a Coriolis compel that follows up on a vibrating object when a precise speed is connected to it. Murata's interesting bimorph vibrating unit is utilized as the sensor component unit, along these lines empowering piezoelectric earthenware production to be utilized for both excitation and identification. The utilization of this unit rearranges gear structure and circuit design, in this way making it conceivable to give exceptional execution. This sensor can be utilized for positional control and stance control of a moving item requiring accuracy and brisk reaction estimations. Chip: ENC-03RC Op-amp: The ENC-03RC (SOT23-5 bundle, brilliant execution) Power supply :3-5v Output mode: simple output Ultra-little size: 10mm * 17.5mm

 

9DOF IMU ADXL345 + HMC5883L + ITG3205
close

 

Specifications:

Nine axis modules (three-axis gyro three axis acceleration tri-axial magnetic field)

Using immersion gold plating PCB process

Chip: ITG3205 ADXL345 HMC5883L

Power supply: 3v-5V power

Description

Specifications:

Nine axis modules (three-axis gyro three axis acceleration tri-axial magnetic field)

Using immersion gold plating PCB process

Chip: ITG3205 ADXL345 HMC5883L

Power supply: 3v-5V power

Communication mode:

IIC communication protocol (fully compatible with 3v-5V systems, including LLC circuit)

Size: 22mm*17mm

Package included:

1 x Mini Nine axis degree of freedom IMU sensor ITG3205 ADXL345 HMC5883L

GY-521 6DOF IMU MPU-6050 3 Axis Gyro+Accelerometer Module
close

Features
Name: MPU-6050 module (three axis gyro + three axis acceleration) 
Use chip: MPU-6050 
The power supply: 3-5 v (internal low voltage difference voltage stabilizing) 
Communication: standard IIC communication agreement 
Chip built-in 16 bit AD converter, 16 bits of data output 
The gyroscope range: + 250 500 1000 2000 /s 
Acceleration range: 2 4 8 16 g 

Features
Name: MPU-6050 module (three axis gyro + three axis acceleration) 
Use chip: MPU-6050 
The power supply: 3-5 v (internal low voltage difference voltage stabilizing) 
Communication: standard IIC communication agreement 
Chip built-in 16 bit AD converter, 16 bits of data output 
The gyroscope range: + 250 500 1000 2000 /s 
Acceleration range: 2 4 8 16 g 

Specifications:
Size:about 21*15*1.2 mm(max)
Net weight:3 g 
Color:Blue

 

GY-951 9DOF IMU WITH ON-BOARD ATMEGA328 MODULE(ITG3205 + ADXL345 + HMC5883L + ATMEGA328)
close

Description: 

Display: GY-951 

Utilizing the chip: Atmega328 + ITG3205 + the ADXL345 + HMC5883L 

Power supply: 3-5V 

Methods for correspondence: sequential correspondence convention 

Measure: 2.3cm * 1.7cm

MPU-9250 9DOF Module 9 axis Attitude Gyro Compass Acceleration Magnetic Field Sensor GY-9250
close

Description:
Chip: MPU-9250
Power supply: 3-5v (internal low dropout regulator)
Communication: Standard IIC / SPI communication protocol
16bit AD converter-chip 16-bit data output
Gyro range: ± 250 500 1000 2000 ° / s
Acceleration range: ± 2 ± 4 ± 8 ± 16g
Magnetic field range: ± 4800uT
Using Immersion Gold PCB, machine welding process to ensure quality
2.54mm pin spacing
Module size 15mm * 25mm
 

GY-9250           ARDUINO PRO MINI
VCC-----------------5V
GND----------------GND
SCL------------------A5
SDA-----------------A4