Products categories

KF301-3P 5.08mm 3 pin Blue Terminal Connector
close

Condition:Brand New
Rated voltage/Rated current:250V/16A
Pitch:5.08mm
Color:Blue and Silver

 

FT232RL USB to Serial Adapter Module USB TO UART (Economy)
close

Description:
Use FT232RL chip;
Draw out all signal port of FT232RL chip;
RXD/TXD transceiver communication indicator;
USB power supply, can choose 5V or 3.3V ,set by jumper.
Each module has been tested
Can use for Arduino Pro Min.

 
Package Included: 
1 X FT232RL Module
1 X 6P Pin

Xbee Header Pin Male
close

Xbee 2.0mm Header Pin Male
Description:
Pitch: 2.0mm
Gender of Connector: Male
Number of Pins: 40Pin
Type of Row: Single-Row
Type of connector: Straight
Length:10cm
Pin length:11mm
 
Package Included:

1 x 40Pin 2.0mm Single Row Straight Pin Header Male  

28BYJ48 5V Stepper Motor
close

Signal Output function :
Brand new and high quality.
Voltage: 5V.
Diameter: 28mm.
Step angle: 5.625 x 1 / 64.
Reduction ratio: 1 / 64.
5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board used for.
supporting the use of a direct plug and easy to use stepper motor used in the development board.
Dimensions of the Board : 31mm x 35mm.

 

.03nF 0805 SMD Capacitor ( 20pcs packet)
close

.03nF 0805 SMD Capacitor 

Yun Shield for Arduino ( Linux, WiFi, Ethernet, USB, All-in-one Shield)
close

Yun Shield is one of the most powerful shields for Arduino Board. Yun Shield is designed to solve the Internet connectivity and storage issue for Arduino Board. It provides a linux system, WiFi, Ethernet and USB (can used for camara, storage, 3G etc) to Arduino

 

INTRODUCTION

Yun Shield is one of the most powerful shields for Arduino Board. Yun Shield is designed to solve the Internet connectivity and storage issue for Arduino Board. It provides a linux system, WiFi, Ethernet and USB (can used for camara, storage, 3G etc) to Arduino.

Yun Shield runs Open Source OpenWrt system (Same system as runs in Arduino Yun) and it is fully compatible with Arduino IDE v1.5.4 or later. Yun Shield is the ideally choice for Arduino Projects which require various internet connections and more storage.

Basically, Yun Shield + Leonardo equally to the official Arduino Yun, but Yun Shield is more flexible because it can works with other Arduino board such as Uno, Duemilanove, Mega etc. And Yun Shield use external wifi antenna which provides stability and possibility for various environments.

FEATURES

  • Open source Linux (OpenWrt) inside
  • Low power consumption
  • Compatible with Arduino IDE 1.5.4 or later, user can program, debug or upload sketch to Arduino board via Arduino IDE.
  • Managed by Web GUI, SSH via LAN or WiFi
  • Software upgradable via network
  • Built-in web server
  • Support internet connection via LAN port, WiFi or 3G dongle.
  • Support USB flash to provide storage for Arduino projects.
  • Failsafe design provides robustly system.
  • Compatible with Arduino Leonardo, Uno , Duemilanove, Diecimila, Mega.

SPECIFICATIONS

  • Processor: 400MHz, 24K MIPS
  • Flash: 16MBytes
  • RAM: 64MBytes
  • Power Input: 4.75v ~ 23v via Arduino VIN pin
  • 1 x 10M/100M RJ45 connector
  • 150M WiFi 802.11 b/g/n
  • External Antenna via I-Pex connector
  • 1 x USB 2.0 host connector, used for USB storage or 3G connection
  • 1 x Reset button
  • Compatible with 3.3v or 5v I/O Arduino.

Links to Documents:

Quick Start Guide

User manual

Hardware Source

 
 

Bluetooth Bee With V2.0 HC-05 (HC05) (Master/Slave)
close

Features:

This module was designed to XBEE so it's compatible with XBEE expansion base.This module was designed to XBEE so it's compatible with XBEE expansion base.
It can be used to MCU system whose voltage is 3.3V.
User can set master--slave model, baud rate, paring password and user's information by AT command.
Modifying baud rate will take effect after restarting.

 

HC05 Bluetooth Bee With V2.0 Wireless Master-Slave Module For Compatible Xbee Arduino

Features:

This module was designed to XBEE so it's compatible with XBEE expansion base.This module was designed to XBEE so it's compatible with XBEE expansion base.
It can be used to MCU system whose voltage is 3.3V.
User can set master--slave model, baud rate, paring password and user's information by AT command.
Modifying baud rate will take effect after restarting.
Bee Adapter is convenient to link Bluetooth Bee so as to exchange data with PC.
Sensor shield is designed to insert Bluetooth Bee to Arduino and enable Arduino to control bluetooth data easily.
Bluetooth adapter pairs with Bluetooth Bee salve device.
With efficient on-board antenna, exposed antenna qualifies the transmit signal and make it farther.
With transparent serial, it can be paired with a variety of Bluetooth adapter and Bluetooth phone.
User-friendly design facilitates the secondary development.
After testing, this module can be used with all bluetooth adapter in the market. (Goods with bluetooth include laptop and mobile phone.)

Specification:

Weight: 5g
Size: 3.3 x 2.5 x 0.9 cm (L x W x H)
Default baud rate: 38400
Default slave model
Default paring password: 1234
Power supply: 3.3V
Power supply more than 3.3V will destroy the module.
Paring user's name: HC-05

 

3.5MM Audio Socket module
close

3.5mm Audio Socket Stereo Sound Module w/ Mic for MP3 Player – Red
Description:
The audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone.