Instruments & Tools

vr box Goggles For virtual reality
close

Retractable Design With a retractable mobile frame design, the VR BOX 2 has streamlined the mobile loading process into a pull-and-push. Since the 1st generation of early adopters had learned the hard way about needing to dismantle the front cover in order to answer phone calls, VR BOX 2’s Lead Designer has taken a big step forward for the industry. The re-imagining of the layout inspired a retractable frame which allows you to answer incoming calls without redundant operation. This evolution saves both time and effort and creates a more streamlined user experience.

Heat Dissipation

 

Apart from the cabinet cover’s sliding design, the multi-vent shell also facilitates the dissipation of heat. This allows the device to extend its lifespan as well as providing additional comfort to the wearer for both short and long-term usage.

 

Earphone Jack

 

Are you feeling anxious about a possible compromise in the auditory experience? Rest easy audiophiles! Ideally placed bullet holes added to both sides of the VR BOX 2 function as the earphone jack depending on user preference. Just plug in your earphone into either of the ports available and you are ready to go! Escape from the hustle and bustle, immerse yourself in a private 3D virtual reality dreamscape.

 

IPD & Focus Adjustment

 

IPD and Focus can be adjusted to adapt to your eyes.
IPD adjustment function enables the distance between the lenses to correctly match every user’s interpupillary distance (the distance between the centers of the pupils in both eyes) to have extended range.
Undoubtedly, the ideal solution for glasses wearers would be focus/diopter adjustment ranging 5mm, allowing no glasses to be worn, but enabling users to adapt the lenses to their exact vision prescription.

 

Adjustable Head Strap

 

Keeping in mind the varying size differences amongst wearers, the ergonomically contoured adjustable head strap is designed with material of a superior elasticity. This provides a consistent level of comfort and stretches when needed so that you may adjust it to fit any user securely.
In addition to the re-design of the outer portions, the interior of the glasses are also made with an ergonomically thoughtful method. Near the lens portion of the VR BOX 2you will find ample use of soft cloth-like material alongside a layer of thin foam cushion, alleviating pressure around the bridge of the nose for wearers. This upgrade in design, compared to other products, continues to define the VR BOX 2 as the industry standard when thinking of user comfort.

 

Space reserved for myopia glasses

 

Besides the adjustable focus/diopter, the VR BOX 2 team has taken eyeglass wearers into consideration with extra space available for most frame sizes at the rear of the lens.

 

Blu-ray proof toughened glass

 

 

 

With built-in Blu-ray proof toughened glass to protect your eyes from ultraviolet, blu-ray and radiation.
The Blu-day proof toughened glass is composed of 5 layers, namely, anti-radiation layer, anti-ultraviolet layer, anti-bluray layer, electrostatic adsorption layer and toughened glass layer.

 

Compatible with 4.7in - 6in Mobiles

 

VR BOX 2 is customized to work with the majority of smartphones sized between 4.7 to 6 inches from any brand, relieving any stress one may have about compatibility with their current and future phone model. Simply slide your phone into the frame at the back of the multi-vent shell, adjust the IPD & focus, then start any of the dozens of VR applications available in different App stores available to Android & iOS users.

Third Hand Soldering Station Magnifying Glass With LED lights
close

Enclosed soldering station magnifying glass with 2 LED lights branded 3.5 times and 12 times the desktop magnifying glass experimental test mirror

Main Features:
-Fit for the identification of jewelry, observation specimen, science teaching, industrial, textile, computer and old inspection. 
-with two LED lighting, this model can work very well in the dark environment. 
-a helpful help for welding work or model makers. 
-Adjustable crocodile fastening clips. 
- lower compartment contain steel plate, which may improve stability.
 
Color: Gray 
Material: Steel 
Type: Tools
Name: Light source magnifying glass universal work frame Material: metal + resin (base is plastic) Magnifier: double the number of 3.5 times the maximum magnification of 12 times the magnifying glass diameter 60mm Light source: two LED lights, using the No. 7 battery 3 (without battery) Packing: box plus foam box   The scope of application is very wide, not only used in maintenance of electrical appliances, can also be used for sculpture, 
identification, hand-made, etc., When you need to do fine work, you can put things firmly, stable, magnified by magnifying glass to do, a good solution,
when you repair the electrical appliances
do not have to take a single mirror to take electric soldering iron. Activities of the arm, fixed clip, magnifying glass 
components can be any direction of rotation 
adjustment, magnifying glass diameter 60mm, there are two multiples, high and low with easy observation and maintenance.

LM35 Temperature Sensor
close

1 Features

• Calibrated Directly in Celsius (Centigrade)

• Linear + 10-mV/°C Scale Factor • 0.5°C Ensured Accuracy (at 25°C)

• Rated for Full −55°C to 150°C Range

• Suitable for Remote Applications

• Low-Cost Due to Wafer-Level Trimming

• Operates from 4 V to 30 V

• Less than 60-μA Current Drain

• Low Self-Heating, 0.08°C in Still Air

• Non-Linearity Only ±¼°C Typical

• Low-Impedance Output, 0.1 Ω for 1-mA Load

The LM35 series are precision integrated-circuit temperature devices with an output voltage linearlyproportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device makes interfacing to readout or control circuitry especially easy. The device is used with single power supplies, or with plus and minus supplies. As the LM35 device draws only 60 μA from the supply, it has very low self-heating of less than 0.1°C in still air. The LM35 device is rated to operate over a −55°C to 150°C temperature range, while the LM35C device is rated for a −40°C to 110°C range (−10° with improved accuracy). The LM35-series devices are available packaged in hermetic TO transistor packages, while the LM35C, LM35CA, and LM35D devices are available in the plastic TO-92 transistor package. The LM35D device is available in an 8-lead surface-mount small-outline package and a plastic TO-220 package.

photo sensitive dry film (sheet) For PCB Circuit (1meter X 30cm)
close

Features
-Photographic film, also known as dry film, is used to make PCB board, stick it on top of the PCB, it will become a sensitive circuit board. 
-Suitable for plating, hole Covering and the etching process. 
-Excellent ability to cover holes 
-High Resolution 
-Excellent adhesion to almost all surfaces 
-Image clarity after exposure 
-Front-panel is very clean after developed 

Etching
The dry film is resistant to most of the acid etching solution, the PH value can be resistant to most alkaline etching solution between PH8.0 ~ 8.5. 

Cover hole
1.5 mil dry film can fully cover a 0.25 inches thickness hole.

Plating
The dry film is available in most common use of the plating bath, no wrinkles, no color. 

4X200mm Black Nylon Cable Tie With High Strength (High Quality)
close

Colour: Black

Precision Hobby Craft Knife / Cutter With Safety Cap
close

Precision Hobby Craft Knife With Safety Cap Stainless Steel Blades Cutting Tool Set for PCB Scrapbooking Sculptures Repair DIY Art Work 

Description:
Non-slip design Light aluminum handle is easy to grip. Adjustable chuck, fixes the blades firmly. 
Translucent safety cap prevents fingers from scratch. Multi-purpose use, perfect for craft projects, 
scrapbooking, picture cropping and more. 
Includes different shape Steel Blades,Fine Point Blade,Chisel Blade,Curved Edge 
Extra 5pcs Blade

Caution: 
This product contains sharp blades it may cause injury if grasped by children.

Package Includes:
1 X Precision Hobby Craft Knife

(10A /240V) Multi-function All in One Universal International Plug Adapter
close

Laser Range Finder With Angle and Height
close

 

 

 

Hobby sharp cutter with 10 blades pack
close

Its sharp edge allows you to cut different things, it comes with a pack of 10 blades which enables this sharp cutter to be used for a long time.

Mounting Bracket For Ultrasonic Sensor
close

 

Description:
Thickness :1.8mm
Diameter of mounting hole: 3.1mm
Material: acrylic
Usage: fixed ultrasonic sensor modules and other products
Color: Red

10cc Solder Paste Flux Sn63 Needle Shaped Xg-z40
close

Suitable for
Adapted to the mobile phone repair industry, computer digital service industries,
High-precision circuit board soldering SMT, BGA soldering processes, etc.

Product specifications
Type: XG-z40

Alloy: Sn63 / Pb37
Microns: 25-45um
Volume: 10cc