LCDs & Display

ITDB02-1.8SP 1.8 inch Arduino TFT LCD Display Module Shield Kit
close

ITBD02-1.8SP is a 1.8" TFT LCD module with 262K colors 128 x 160 resolutions. The display interface is serial, so it just needs 5 wires (CS,RS,SCL,SDA,RST) for controlling. The controller of this LCD module is ST7735.

ITDB02-1.8SP is supported by UTFT Library.

http://www.rinkydinkelectronics.com/library.php?id=51

 

Specifications

Driver IC ST7735B
Backlight 4LEDs
Power supply 5/3.3V DC
Touch Panel N
Touch IC /
Resolution 128*160
Size 50mm * 36mm

Hardware

ITDB02 1.8SP.jpg ITDB02-1.8 Spec.jpg

 

PinMAP
Pin Type* Description
VIN P 5V Power Supply pin
GND G Ground
RST I Reset,Low level active
RS I Data/Command selection
SDA I Serial data input
SCL I Serial clock input
CS I Chip Selection,Low level active
VDD33 P 3.3V Power Supply pin

Type*:P: Power supply; G:Ground; I:Input; O:Output;

Download

Datasheet for ST7735

Datasheet for ITDB02-1.8SP

Schematic

Demo code

UTFT library

Useful Links

by Henning Karlsen

Instruction for ITEAD studio TFT Module

 

4.3 inch Nextion TFT LCD Touch Based LCD
close

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It i

Overview

4.3" Nextion NX4827T043 TFT Intelligent Display

Package include: a Nextion 4.3'' display, a wire, a power supply test board

Note: there's a small power supply test board and a wire for you to test if the electricity supply is enough or not. Please see below image how to use it.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results. In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

It's easy to adapt Nextion family HMI to existing projects, you just need to provide it a UART.

NX4827T043 is a powerful 4.3'' HMI, which is member of Nextion family. Features include: a 4.3" TFT 480x272 resistive touch screen display, 16M Flash, 2KByte RAM, 65k colors.

video Link: https://www.youtube.com/watch?time_continue=62&v=FMWQ1dXZr2I

Features

  • Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2.
  • 480 x 272 Resolution
  • RGB 65K true to life colours
  • TFT Screen with integrated 4-wire Resistive Touch Panel
  • Easy 4 pin interface to any TTL Serial Host
  • 16M Flash memory for User Application Code and Data
  • On board micro-SD card for firmware upgrade
  • Visual Area:95.04mm(L)×53.86mm(W)
  • Adjustable Brightness:0~230 nit, the interval of adjustment is 1%
  • 5V250mA power conusmption
Nextion_hardware

Software

Nextion_Software

Nextion_Software

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.

Technical support

For technical support, please open a ticket on Itead Support System.

ADDITIONAL INFORMATION

Link Wiki No
Model IM150416003
Display Size 4.3”
Display Resolution 480 * 272
Display Interface Serial
Display Controller No
Expand
  • SD Card Socket
  • Touch Screen
Board Size 120mm*74mm
Weight 141.0000
TFT display interface N/A

Input/Output (Keypad / Buzzer) Expansion interface board for Nextion TFT Display
close

 

The first expansion board for Nextion Enhanced HMI displays. Enhanced and higher version Nextion displays support 8 GPIO, thus we can use this expansion board to control Nextion. The board has 6 buttons, which include Esc, Enter, Left, Right, UP, Down. Also, indicating buzzer and LEDs are included
Note: this expansion board can only work with Nextion Enhanced Display, not for basic Nextion Display

0.96 Inch 128x64 Oled Yellow and Blue I2C/Serial LCD Display
close

Description:

Probably one of the brightest, most versatile and inexpensive OLED currently on the market - great with Arduino or the WCT Pro Mini+. It's an I2C device with address of 0xC3, however you can also communicate with it using SPI at address 0x78. Very versatile and fun to use. It does not have readable RAM so it uses 1K of the Arduino's RAM for video buffering (only 128 Bytes of ram on the WCT Pro Mini+).

Features:

  • Wide voltage range: 3.3V-5V DC
  • Viewing angle: greater than 160 degrees
  • Driver IC: SSD1306
  • Size: 0.96 inch
  • Communication: IIC, only two I/O pins!

Documents:

IIC I2C Serial Interface Module for 16x2/20x4 LCD
close

If you have a problem with the wiring, multi-line LCD display makes confusing or inadequate leg Arduino I2C LCD module, this is the recommended option. It can be connected to the LCD monitor 16x2 or 20x4 using wires only two lines to help ease leg rest Arduino to use the E key, easy to use with standard library available.

 

Details 1602 2004 LCD Adapter Plate IIC I2C Interface for arduino.

  • I2C Address: 0X20 ~ 0X27 (the original address is 0X20, you can change it yourself).
  • Supply voltage: 5V
  • with backlight and contrast adjustment. potentiometer
  • I2C Address: 0x27 (I2C Address: 0X20 ~ 0X27 (the original address is 0X27, you can change it yourself).
  • Compatible for 1602 LCD
  • Weight: 5g
  • Size: 5.5x2.3x1.4cm

 Sample code 1602 2004 LCD Adapter Plate IIC I2C Interface for arduino.

// Display the pink text.

# include < Wire.h > 
# include < LCD.h > 
# include < LiquidCrystal_I2C.h >.

# define I2C_ADDR 0x27 // <
 # define BACKLIGHT_PIN 3.


LiquidCrystal_I2C LCD ( I2C_ADDR , 2 , 1 , 0 , 4 , 5 , 6 , 7 ) ;

void Setup ( ) 
{ 
  //lcd.begin (16,2); // <
  LCD . BEGIN ( 20 , 4 ) ;  // 
  Lcd.setCursor (3,1); //. go to the third row, the second letter.
  lcd.print ("Welcome ALL To");  

  LCD . SetCursor ( 5 , 2 ) ;  // to the character of the fifth row 3 
  LCD . Print ( " ArduinoAll " ) ;  

}

void loop ( ) 
{

}


More information 1602 2004 LCD Adapter Plate IIC I2C Interface for arduino.

 

Adafruit PiTFT - 320x240 2.8 TFT+Touchscreen for Raspberry Pi TFT
close

Add a compact 320x240 resolution screen to the top of your Pi

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!

It's designed to fit nicely onto the Pi Model A or B but also works perfectly fine with the Pi 2 or Model B+ as long as you don't mind the PCB overhangs the USB ports by 5mm

raspberry_pi_1601console_LRG.jpg
This design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.

We bring out GPIO #23, #22, #21, and #18 to the four switch locations!
raspberry_pi_1601kit_LRG.jpg
To make it super easy for use: we've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. 
raspberry_pi_1601titles_LRG.jpg
 
 
More detail available here 
 
https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/overview

Educational Booster Pack MKII - BOOSTXL-EDUMKII - TI
close

The Educational BoosterPack MKII offers a high level of integration for developers to quickly prototype complete solutions. Various analog and digital inputs/outputs are at your disposal including an analog joystick, environmental and motion sensors, RGB LED, microphone, buzzer, color LCD display, and more.

This BoosterPack was developed with Energia in mind. Energia is an open source, community developed coding environment, which is supported by a robust framework of intuitive APIs and easy-to-use software libraries for rapid firmware development. We recommend Energia v12 or later. Learn more about Energia at www.energia.nu.

Features
  • TI OPT3001 Light Sensor
  • TI TMP006 Temperature Sensor
  • Servo Motor Connector
  • 3-Axis Accelerometer
  • User Push Buttons
  • RGB Multi-color LED
  • Buzzer
  • 40-pin Stackable BoosterPack Connector
  • Color TFT LCD Display
  • Microphone
  • 2-Axis Joystick with Pushbutton
What's Included

 

Nextion 7
close

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less.

Description:
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results. In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

It's easy to adapt Nextion family HMI to existing projects, you just need to provide it a UART.

This is a powerful 7.0'' HMI, which is member of Nextion family. Features include: a 4.3" TFT 480x272 resistive touch screen display, 16M Flash, 2KByte RAM, 65k colors.

Note: there's a small power supply test board and a wire for you to test if the electricity supply is enough or not. Please see below image how to use it.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results. In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.



Features:

800 x 480 Resolution
RGB 65K true to life colours
TFT Screen with integrated 4-wire Resistive Touch Panel
Easy 4 pin interface to any TTL Serial Host
16M Flash memory for User Application Code and Data
On board micro-SD card for firmware upgrade
Visual Area:154.08mm(L)×85.92mm(W)
Adjustable Brightness:0~230 nit, the interval of adjustment is 1%
5V510mA power conusmption

Package Included:
1 X  7.0" HMI LCD Display Module
1 X 4P Cable
1 X UB to 2pin connector

 

Nextion_hardware

Software

Nextion_Software

Nextion_Software

 

2.8 inch 240X320 TFT LCD Display Screen Shield for Arduino
close

2.8 inch TFT LCD Display Screen with Colorful Touch Screen Module 240X320 for Arduino

Description:
LCD screen size:2.8 inch
Visual angle: 120°
LCD driver chip:ILI9325 
Logic level:2.8V-3.3V 
Data interface:8 bit和16 bus interface
Shield mode:8 bit bus mode
Supply voltage:DC 5V
Touch control board 
White backlit

Parameter                        Specification                Unit    
Module size                     H/W/D 81×53×15               mm 
Effective area                    W/H 43.2×57.6               mm  
Resolution ratio                  W/H 240×320                 Dot 
LCD color                             RGB
Pixel                             W/H 0.18×0.18               mm 
LCD type                    TFT              

Package Included:
1 X 2.8 inch TFT LCD Screen Display Touch Screen

Raspberry Pi 5 inch HDMI TFT Screen LCD
close

  • 800 × 480 HD resolution, support for touch control
  • Compatible and can be plugged directly into any version of Raspberry Pi (Type B Raspberry Pi generation need to reprovision the HDMI cable)
  • Providing a driving (it can be used directly customizable Raspbian system)
  • Universal HDMI display is not limited to raspberry pie (with resolution requirements)
  • For display only, does not occupy any I / O resources (using the touch function, taking I / O)
  • Support backlight control, more power
  • Immersion Gold process, crafted

Information includes:

  • User's manual
  • Supporting the mirror
  • develop software
  • Development Information

Downloads path:  www.waveshare.net/wiki/5inch_HDMI_LCD

i2c IIC Serial 128X64 (12864) OLED 1.3 Inch Blue LCD Display Module
close

Description:

Size: 1.3
Resolution: 128X64
Color: Blue
Viewing angle: greater than 160 degrees
Supported platforms: for  arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1106
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight

Interface:
VCC: 3.3-5V 
GND: Ground
SCL: Serial Clock
SDA: Serial Data

Package Included:
1 X IIC OLED Moudle

Nextion 5 inch Serial HMI TFT Touch Panel LCD
close

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less

 

Description:
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results. In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

It's easy to adapt Nextion family HMI to existing projects, you just need to provide it a UART.

This is a powerful 5.0'' HMI, which is member of Nextion family. Features include: a 4.3" TFT 480x272 resistive touch screen display, 16M Flash, 2KByte RAM, 65k colors.

Note: there's a small power supply test board and a wire for you to test if the electricity supply is enough or not. Please see below image how to use it.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results. In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.



Features:

 800 x 480 Resolution
RGB 65K true to life colours
TFT Screen with integrated 4-wire Resistive Touch Panel
Easy 4 pin interface to any TTL Serial Host
16M Flash memory for User Application Code and Data
On board micro-SD card for firmware upgrade
Visual Area:108mm(L)×64.8mm(W)
Adjustable Brightness:0~230 nit, the interval of adjustment is 1%
5V410mA power conusmption

 

Nextion_hardware

Software

Nextion_Software

Nextion_Software



Package Included:
1 X 5.0'' HMI LCD Display Module
1 X 4P Cable
1 X UB to 2pin connector