TV Mini Keychain Universal Remote Control for Philips for Sony for Panasonic for Toshiba for TCL
Please Note: It does work very well for the older style tv
but does not work with all HD LCD or LED tv's
The Universal Remote Control is so small that you can easily fit it in your pocket, purse, or wallet. It also has a strong keychain clip if you would like to attach it to your keys.
This Universal TV Remote Control comes very handy when you stay at hotels, or office waiting rooms, sitting at bars, and fitness gyms. The remote will not mess up any programming on your existing TV! It will simply act as a replacement for your broken or lost universal television remote.
Easy Setup for TV: Press and hold the MUTE button until mute the volume on the TV, then release the button immediately, then the setup is done and you can utilize it
Buttons on Panel: Power button; Channel control button; Volume control button;
Mute; AV/TV control button
Power: 3V CR2025 (Installed) include
Compatible: for Sony for Panasonic for Toshiba for Samsung for Sanyo for Aiwa for Sanyo for TCL for Nitsubishi for Hisense for Xiahua for Panda for NEC for Toba for Sherwood for Philips for Yousida for Peony for JVC for Akai for Skyworth for Zenith for Cowan for Haier for LG for Funal for Changhong for Goldstar for Olympic for Nikon for RCA for Sharp for Changchen for Xogego for National for Konka etc.
Size: 59x35x6mm or 2.32x1.38x0.23in
Original box: NO
Net weight: 14g
Package weight: 22g
Snap-in construction for PCB mounting
Package height : 7mm
Plastic polycarbonate housing construction which prevents crosstalk
L = long leads
Current Tranfer Ratio (CTR) of typical 10%
Psition sensor for shaft encoder
Detection of reflective material such as paper, IBM cards, magnetic tapes etc.
Limit switch for mechanical motions in VCR
General purpose - wherever the space is limited
Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions...more detail given below
Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions.
This sensor detects 280-390nm light most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum. It outputs a analog voltage that is linearly related to the measured UV intensity (mW/cm2). If your microcontroller can do an analog to digital signal conversion then you can detect the level of UV!
This infrared sensor trio detector and trio output
Build-in TCRT5000 sensor
Work Power : 5VDC
Applicable to a variety of platforms including Arduino/AVR/ARM/PIC
1 X 3-way Tracking Sensor
- ABS material
- Automatic IR motion sensor switch
- Automatic turn on/off while detected people come or left
- Detecting Range: 140 degree cone angle (within 7 meters)
- Voltage: AC 110~250V (50~60Hz)
- Working temperature: -20~+50'C
- Static power: Less than 0.06W
- Resistive load Power: 200W
- Inductive load power: Less than 60W
- Working illumination: 120Lux ± 20%
- Time Delay: 16s ± 20%
- Comes with 2 mounting screws
Ultra-thin IR Infrared Remote Controller For Arduino Intelligent Car SCM Learning Board Remote Control
CR2025 environmental protection button batteries required.
Working Distance: more than 8 m ( effected by the surrounding environment, the receiver sensitivity etc )
Effective Angle: 60 degrees
Surface materials: 0.125 mmPET stick, With effective life : 20000 times.
Stable quality, cost-effective
Static current 3-5 uA, dynamic current 3-5 mA
1 X remote controller
Slot Type on the radio using optical, non-transparent objects can be triggered by Slot Type, output 5V TTL level. Schmitt trigger pulse to shake, can be used to measure car speed, distance measurement applications!
Four pin defined as +5 GND OUT1 OUT2, OUT1 OUT2 is level output! Direct access to the microcontroller IO port, each way with a LED indicating the output status
1 X 2WD Speed Module
Lens Color : Water Clear
Forward Voltage (V) : 1.5~1.6
Forward Current (mA): 60mA Continuous, 120mA peak for 10% pulse width
Wavelength (nm): 940
View Angle: 15-30 degree
1 X Infrared Transmitting Tube