package:
1.component box*1
2. MEGA 2560 R3 *1
3.MYB-120 breadboard*1
4.red/blue/yellow LED lighting*5
5.resistor 200 ohm *8 , 1K*5 , 10K* 5.
6.wires*30
7.USB cable*1
8.potentionmeter*1
9.digital tube*1
10.source buzz*1
11.non-source buzz*1
12.button*4
13.photoreponse *2
14.Tilt switch*2
15.flame sensor*1

Download the Basic Arduino Codes for Learning from below Link

https://www.adrive.com/public/UF2Fnt/FZ0532-RFID%20Kit.rar

This package contains the following components:

ARDUINO UNO R3 board * 1

High quality and large bread board * 1

RFID module * 1

IC Keychain * 1

Non-contact type IC card * 1

I2C 1602 LCD module * 1

5V Relay * 1

DS1302 clock module * 1

Voice detection module, * 1

Temperature and humidity module * 1

Level detection module, * 1

4 * 4 keypad module * 1

Three-color RGB module * 1

XY joystick * 1

Servo * 1

Stepper motor driver board * 1

Blue LED * 5

Yellow LED * 5

Red LED * 5

1k resistor * 5

10k ohm resistor * 5

220 ohm resistor * 8

Buzzer * 2

Key module (with hat) * 4

ROCKER SWITCH * 2

LM35 sensor module * 1

Photoresistor * 3

Fire * 1

Infrared receiver * 1

Adjustable potentiometer * 1

A digital control * 1

4 digital tube * 1

8 * 8 dot matrix module * 1

74HC595N chips * 1

Infrared remote control * 1

Breadboard Jumper 30

Male to Female DuPont lines * 30

9 volt battery snap * 1

USB Cable * 1

Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. All you need to do to get this kit set up, ... more detail given below

Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. All you need to do to get this kit set up, simply attach the Lepton® imager module into the provided breakout, connect the headers, and you will be seeing in full darkness in no time!

The Lepton® LWIR module included in each FLiR Dev Kit packs a resolution of 80 × 60 pixels into a camera body that is smaller than a dime and captures infrared radiation input in its nominal response wavelength band (from 8 to 14 microns) and outputs a uniform thermal image. Meanwhile, each breakout board in these kits provides the socket for the Lepton®, power supply’s, 25Mhz Crystal Oscillator, 100 mil header for use in a breadboard or wiring to any host system. A few things to consider about this kit: the breakout board will accept a 3-5V input and regulate it to what the Lepton® wants, to read an image from the lepton module all you need is an SPI port, and to configure the camera settings you also need an I2C port, although this is not required.

Note: This kit comes in two separate parts and will need to be assembled once received. The Lepton® module is extremely sensitive to electrostatic discharge (ESD). When inserting it into the breakout board be sure to use proper personal grounding, such as a grounding wrist strap, to prevent damage the module.

Includes:

• 1x FLiR Lepton® - Thermal Imaging Module
• 1x FLiR Lepton® - Breakout Board

Features:

• LWIR sensor, wavelength 8 to 14 μm
• 51-deg HFOV, 63.5-deg diagonal
• 80 (h) × 60 (v) active pixels
• Thermal sensitivity
• MIPI and SPI video interfaces
• Two-wire I2C-like serial-control interface
• Fast time to image (< 0.5 sec)
• Low operating power, nominally 150 mW (< 160 mW over full temperature range)

Documents:

• Schematic
• Datasheet (Lepton®)
• Hookup Guide
• SDK
  • 32bit
  • 64bit
• Reverse-Engineering the Lepton®
• Product Page
• GitHub (Library, Example Code, & Design Files)

Source: SparkFun

Package Included:
UNO R3 board*1
I2C1602 LCD*1
Acrylic plate*1
Mini Breadboard*1
Ultrasonic sensors*1
XY joystick module*1
Soil moisture sensor*1
Water level sensor*1
Temp and humidity sensor*1
Smoke sensor*1
LM35 temp sensor*1
Sound Sensor*1
Triaxial accelerometer*1
Light sensor*1
DuPont line*10
3PIN sensor wire*5
Pin*1
USB cable*1
Plastic box*1

An interesting DIY assembly like 14 In 1 Robot will bring children much fun. Especially when children are in very young age, parents should focus on their intelligent development. For example, the transformable robot can train and teach children natural science. Meanwhile, it can motivate their ...

video: https://www.youtube.com/watch?v=uutkj1xoEdA

Description:

Net Weight: 486g/17.14oz
Size: 31x20x6.5cm/12x7.9x2.6inch

Features:    

14-in-1 DIY solar powered building block
This solar powered robot can be transformed into 14 different robots modes which include a multitude of comical and functional movements
It can easily change from wagging-tail-dog-running beetle-walking cra etc
Build the model by himself
Inspire the children's imagination and operation ability
Environmental, educational and enjoyable
Great gift for your kids children
Caution: Smart part,not suitable for children under 6 years old

Size:

Turtle-bot: 12.3*8.5*6.5cm
Walker-bot: 8*6*8.5cm
Quadru-bot: 8.6*7*8.5cm
Wheel-bot: 17.1*9.3*9.5
Boat-bot: 18.2*25.5*9cm
Beetle-bot: 11.5*9.4*8.5cm
Dog-bot: 12*7.2*9cm
Auto-bot: 13*7*10cm
Crab-bot: 9.2*9*8cm
Row-bot: 15*9*9.5 cm
Roly Poly-bot: 7.7*9.3*9.3cm
Zombie-bot: 8.5*8.5*13.7cm
Surf-bot: 29*17.5*8cm
Slither-bot: 18.7*25.5*10cm

Package Includes:     

1 x 14 in 1 Solar Powered Robot DIY - 

Kit Contents:
uno r3 * 1
usb cable * 1
3p sensor cable * 10
1 * 40 pin 1
 piranhas sensor * 1
 straw hat LED module * 1
 Key sensor * 1
 Ball sensor * 1

Kit Contents:

1.uno r3 * 1

2. usb cable * 1

3.3p sensor cable * 10

4.1 * 40 pin 1

5 piranhas sensor * 1

6 straw hat LED module * 1

7 Key sensor * 1

8 Ball sensor * 1

The active buzzer module * 1

10. passive buzzer module * 1

11 knock sensor * 1

12. vibration sensor * 1

13 photoresistor sensor * 1

14 analog temperature sensor * 1

15. infrared receiver sensor * 1

16.-infrared emission sensor * 1

17.DS18B20 temperature sensor * 1

18.LM35 temperature module * 1

19.MQ-2 smoke sensor * 1

20.MQ-3 alcohol sensor * 1

21. potentiometer module * 1

22. crash sensor * 1

23. sensitivity sound module * 1

24. kit box * 1 (8.4cm * 8.8cm * 4.5cm)

Description:
Working principle
Chip lm393 compared the resistor value, when there is an imbalance, the chip will control one motor to stop, while other motor accelerate rotation, in this case, the car can correct direction. The whole process is closed-loop control, so it can be quickly controleed

Package Included:
1 x lm393 voltage comparator
1 X 8P IC Socket
2 X 100uf capacitor
2 X 10K resistor  
2 X 3.3K ohms color ring resisotr
2 x 10K resistor
4 x 51 ohm resistor
2 X 1K ohm resistor/
2 X 10 ohm resistor
2 X CDS5 photoresistor
2 X 3MM led
2 x 5MM LED
2 x 8550 TRIODE
1 x Switch
2 X Motor
6 X Wheel
1 X AA battery case
Several screws and wires

This Starter Kit is based on UNO's R3 development board. It includes the most basic component, such as bread board, breadboard wires, LED lights, resistance.

Package included:
1 x Components storage
1 x UNO R3
1 x Breadboard
15 x LED (3 x Red, 3 x Blue, 3 x Yellow)
8 x Resistance (200 Ohm)
30 x Colorful breadboard wire
1 x USB cable

1 x UNO
1 x breakboard
5 x Red LED
5 x Yellow LED
5 x Green LED
8 x 220 Ohm
5 x 1K Resistor
5 x 10K Resistor
1 x Active buzzer
1 x Passive buzzer
4 x Button switch
2 x Digital tube
1 x 6 AA Battery holder
1 x 4 Digital tube
2 x Ball switch
3 x Photoresistor
1 x Adjustable resistance
1 x Flame sensor
1 x Infrared receiver
1 x LM35 sensor
1 x 74H595
1 x 8*8 Matrix
1 x USB cable
30 x breakboard cable
1 x Mini remote control

Features:

.Obtain the single-chip microcomputer system development ability in the play
.This kit walks you through the basics of using the Arduino in hands- on way

.You will learn through building several creative projects

.Starting the basic of electronics to more complex projects, the kit will help you control the physical world with sensor and actuators 

Specifications:

.Color: Multicolor

.Material: FR4

.Weight: 335g

.Packing: Clear Box

Package Included: