Wireless & Communication

SMA Female (hole inside ) to Female (hole inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber 

SMA-KK-Block Female(hole inside) to Female(hole inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber 

LoRa32u4 II Lora Development Board Module LiPo Atmega328 SX1276 HPD13 868MHZ with Antenna
close

Description:
LoRa32u4 II is a light and low consumption board based on the Atmega32u4 and HPD13  868MHz LoRA module and an USB battery charging circuit. Ideal for creating long range wireless networks that can exceed 2.4 GHz 802.15.4 and similar, it is more flexible than Bluetooth LE, does not require high power unlike WiFi and offers long range.
 
The ATmega32u4 is clocked at 8 MHz and 3.3 V. This chip has 32 K of flash, 2 K of RAM and built-in USB to Serial communication, debugging and programming capabilities without the need for an external FTDI chip, it can also act as an HID device (mouse, keyboard, USB MIDI device, etc).
This board is also equipped with a LiPo and Liion charging circuit and a standard battery interface. It is fully compatible with Arduino. A white user led is tied to pin 13. An orange LED is used for charging status.

HPD13 wireless module, using high-performance, highly integrated RF transceiver chip SX1276 design. Advanced LoRaTM spread spectrum communication technology to ensure that the module communication distance and anti-jamming capability greatly improved, and also achieved a very low current consumption. In the LoRaTM mode, the HPD13 provides higher reception sensitivity performance, more robust anti-jamming capability, and improved communication distance and reliability compared to the same transmit and receive modules on the market. In normal (G) FSK mode, it also provides industry-specific receiver sensitivity, as well as very high communication rates.  


ATmega32u4 @ 8MHz with 3.3V logic/power
3.3V regulator with 500mA peak current output
USB native support, comes with USB bootloader and serial port debugging
Built in 100mA lipoly charger with charging status indicator LED
Reset button
 

HPD13:
Receive current: 10 ~ 14mA
Interface Type: SPI
Operating temperature: -40 ° C to + 85 ° C
Digital RSSI function
Automatic frequency correction
Automatic gain control
Radio wake-up function
Low voltage detection and temperature sensor
Fast wakeup with frequency hopping
Highly configurable packet handlers


 
Document link: http://www.diymalls.com/files/DIY0050-DIY0051-LORA32U4.zip

 

https://drive.google.com/open?id=0B8DSGdAr8_31RkQ0UGo2Nzh1YXM

Package includes:
1 X LoRa32U4 II Lora Module development board

VK16E GMOUSE GPS Module SIRF3 Chip GPS Module w/Ceramic Antenna
close

Description:
Product main chip: U-BLOX UBX-G7020-KT
Built-in LNA signal amplifier
Built-in Flash, free configuration of product parameters
Industry-standard 25 x 25 x 4mm high-sensitivity ceramic antenna
Built-in TCXO crystal and Farah capacitor faster hot start
1-10Hz positioning update rate
Frequency:  L1, 1575.42MHz
Baud rate:  4800,9600,19200,38400,57600,112500bps(default baud rate is 9600)
Channel:  56
Sensitivity tracking: -162dBm Capture: -160dBm cold start -148dBm
Cold start averages:  29 seconds
Warm start averaging:  28 seconds
Hot start averages:  1 second
Precision: HorizontalPosition: Autonomous <2.5maverage
SBAS <2.0m average
Timepulse signal: RMS 30 ns
Maximum height: 50000 meters
Maximum speed: 500 m / s
Maximum acceleration:  ≦ 4G
Update frequency:  1-10 Hz
Dimensions 28 x 28 x 8.5 mm
Weight:  30 grams
Operating temperature -40  to 85 degree celsius
Storage temperature -40 to 85 degree celsius

Application:
It can be used in vehicle monitoring, bus station, car guide
Navigation, ship navigation, notebook navigation and other products
google link https://drive.google.com/file/d/0B8DSGdAr8_31bUdiMWJacjd5X0U/view?usp=sharing (亚马逊用)

Package Included:
1 X G28U7FTTL Replace VK16E GMOUSE GPS Module
1 X cable

SMA 90 degree Male (pin inside ) to Female (pin inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber 

SMA-KK-Nuts Female(hole inside) to Female(hole inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber 

SMA Female (pin inside ) to Female (hole inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber 

SMA Female (pin inside ) to Female (pin inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber 

Data Link 8Km Ebyte E45-TTL-1W 868Mhz Transceiver module RX TX TTL based
close

 E32-868T30S is a wirel ess transceiver module based on SX1276 from SEMTECH(can be transmitter and receiver both). It adopts LoRa spread spectrum technology, with this technology the transmitting distance and penetration ability of the module improved more than 1 times compared with traditional FSK. For more detail and manuall etc please visit Ebyte Website
http://www.cdebyte.com/en/product-view-news.aspx?id=318

Note : An Authentication Letter would be required to purchase this module.

SMA 90 degree Male (Hole inside ) to Female (pin inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber 

SMA 90 degree Male (pin inside ) to Female (hole inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber 

SMA Male (pin inside ) to Male (hole inside)
close

Vibration MIL-STD-202, Method 213 

Characteristic Impedance 50Ω 

Frequency Range DC ~ 12.4GHz (Semi-Rigid Cable 0 ~ 18GHz) 

Operating Voltage 335V max 

Withstand Voltage 1000V rms (Sea Level Minimum) 

Contact Resistance  

Between Conductors ≤ 3 mΩ 

Between outer conductors ≤ 2 mΩ  

Insulation resistance ≥ 5000 MΩ 

Insertion loss ≤0.15 dB / 6GHz 

VSWR Straight flexible cable ≤1.10 + 0.002f 

Semi-rigid cable ≤1.05 + 0.001f 

Bent flexible cable ≤1.20  + 0.003f  

semi-rigid cable ≤1.10 + 0.001f  

Durability ≥500 cycles (cycles) 

Shell brass gold-  

plated pins brass gold-  

plated jacks Beryllium bronze Brass 

elastic contacts beryllium gold-plated  

insulator Poly four Fluorocarbon  

Crimping Sleeve Copper Alloy Nickel or Gold Plated  

o - Seal Silicone Rubber