This 11.1V 1500mAh 75C 3S lipo battery is designed for 150-280 racing quadcopter RC super fans. With high discharge rate ability, it can let the drone get more strong power to take off and speed up. If you love your RC drone, it will be a good and economical choice.

Weight: 150 grams

Features:
Easy to install
Rechargeable battery
Light weight and portable to carry
Large battery capacity can support longer working time
Environmental friendly packaging material
Stable output current, protect your RC model
High discharge rate provide more strong power for your drone
11.1V 1500mAh 75C 3S lipo Battery with XT60 plug
Suitable for RC 150-280 racing quadcopter drone

Specifications:
Brand: OCDAY
Model: VMHT16130
Battery capacity: 1500mAh
Discharge rate: 75C
Battery section: 3S (11.1V)
Charge Plug: 4 pin balance connector
Discharge Plug: XT60
Suitable drone: 150-280 racing quadcopter like QAV180 QAV250 ZMR250
Dimension: 74 * 34 * 29mm (deviation due to manual measurement)
Weight: 140g

Package Information:
Package size: 12.7 * 5.7 * 5.5cm / 5 * 2.2 * 2.2in
Package weight: 177g / 6.2oz
General box package

Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.

Package List:
1 * OCDAY 11.1V 1500mAh 75C Li-Po Battery (XT60 Plug)
1 * Battery Tape
1 * English Manual

Please check pictures for product details.

please check pictures for more details.

Note: B+ and B- of the boosted battery must not be reversed.

Application: All 3.7-4.2V rechargeable lithium batteries, such as mobile phone battery flat battery 18650 battery and so on!

Can be connected to a lithium battery or parallel multi-cell lithium battery

Lithium battery positive electrode connected to B+      lithium battery negative electrode connected to B-

Attention!!!

Note: B+ and B- of the boosted battery must not be reversed.

The first use requires a Micro USB port to activate once

Tips: This shop has a large number of lithium batteries for sale, you can buy them together! !

 Charging indication: the charging display will show the IN letter

Output load indication: long press the LED light button after the load is turned on, the output starts, the display will show the OUT letter and the relative output voltage and current 5V1A or 5V2.1A

Protection function: The protection circuit of the boosted lithium battery has been integrated to prevent over-discharge, over-charge and overload.

Note: B+ and B- of the boosted battery must not be reversed.

Can be connected to a lithium battery or parallel multi-cell lithium battery

Lithium battery positive electrode connected to B+ lithium battery negative electrode connected to B-

Attention!!!

The first time you need to activate the Micro USB port, you will charge it for 1 minute before using it.

It Protects Lithium Battery from Over discharge, Short-circuit, Shack-protect, and overcharges. for more detail please check the detail in the pictures.

This Sleeves can be put on any 18650 cells battery , normally it is used with 3.7V 18650 type battery cells.

Specs:

Product specifications: flattened width 30mm, wall thickness 0.08mm, length 72MM

Shrinkage temperature: 80 ° C

Temperature range: -40 ° C ~ 105 ° C

Temperature rating: 105 ° C

Shrinkage: ≥48±5%

Rated voltage: 300V

• Voltage: 240V AC
• Wattage: 50Hz 100W
• Heat Range: 480-500°C

Please Check Pictures for better understanding...

Please check pictures for details.

Please check pictures for detail.

Please see pictures for more details.