Feature:
The charger uses 110-240V AC mains power.
Charges LiPo, Akku batteries with upto 1A charge current.
High quality, safe and durable.
With led lights to indicate.
Charger is connected:
1. First, connect the power source B3, and three LED lights will turn green, indicating that the charger is in good condition.
2. Next, connect 2S or 3S battery balancing port and LED light turns red, it begins to charge the battery.
3. All the LED lights turn become green, ending the charging process. Please terminate the charging process.
Caveat:
1. Only use the charger and battery type. Do not try to other types of batteries. The charger is not compatible, LILO or NiMH / NiCd batteries.
2. Observe any warnings your battery.
3. Please observe the charger process. If you find any fault, immediately terminate the process.
4. Keep the charger away from moisture, dust, dirt, heat, direct sunlight and vibration.
5. All connections to start the charging process before. Not reverse polarity connection.
6. The charger and battery charging should be placed on a heat-resistant, non-flammable and non-conductive surface. Do not put them on the car seat, carpet or similar. Keep combustible materials away from the work area.
9. Avoid short circuit between the output of the power cord input connector, always connected charger adapter cable, and then give the battery. When the reverse sequence, disconnected.

Specification:
Input voltage: AC 110V-240V
Balance charge current: 1600mA
Charging Power: 20W
Shell Material: Plastic
Show: green and red LED lights
Size:9 x 5.8 x 3.5cm/3.54 x 2.28 x 1.38"(L x W x H)
Weight:188g

Package Include:
1 x B3 Charger
1 x US Plug AC power cord